DIY Tips for Shower Waterproofing

A leaking shower area is nuisance and can lead to major impairments that can result in costly repairs. When you have a leaking shower, it is time to utilize professional services of shower waterproofing Brisbane provides. Arresting the problem in the earliest stages is a step to ensure that you avoid major repairs that can easily break your bank.

One of the most reliable methods to control leakage in showers is to apply waterproofing membrane. To carry out the project, two options suffice: either you hire professional services of shower waterproofing Brisbane offers, or you opt to apply the membrane yourself. If you go with the DIY system, there are steps you need to follow in order to get the best results from your project.

However, it is also advisable to consult waterproofing professionals to find the underlying cause of the problem. Reliable companies for shower waterproofing Brisbane provides have a team of qualified technical staff to advise their clients on all matters related to shower waterproofing. In choosing Brisbane shower waterproofing companies, you need to confirm that they are reliable and can provide the services that you need.

To filter the best companies for shower waterproofing in Brisbane, it is important to read reviews about their services and customer feedback, so you may get their market rating. With many service providers in the market, it is advisable to engage a company that can offer quality service to ensure that your shower waterproofing problems get a permanent conclusion.

While experts in shower waterproofing do commendable job, some owners choose to apply DIY tips to solve their shower waterproofing problems. If you choose to go that direction, here are some tips for applying waterproofing membrane. To begin with, applying a waterproofing membrane in the shower area prevents leakage when water seeps through the grouting in tiles surrounding the area.

In the event that water escapes through the grouting, the membrane is impermeable and therefore water will move towards the drain to avoid formation of mold. In the previous years, plumbers used to apply thin sheets of lead to seal showers against leakage. However, since lead has potential health hazards, another material Chlorinated Polyethylene (CPE) provides a suitable alternative. With its unique waterproof properties, it provides a strong barrier against moisture. Follow these steps to install:

1.    Examine the shower area: the first step is to examine the shower area to clear it of any nails or sharp products. Use a sander or file to flush down any sharp object around the area that you cannot remove. Use a vacuum cleaner to remove any dust and grease.

2.    Level the floors and walls: to make the walls and floors level, apply a thin layer of mortar, with a substrate manufactured specifically for showers.

3.    Apply the membrane to the shower area, covering the perimeter of the area and leaving an overlap all-round. Apply adhesive to the membrane to enable it to bond tightly with the floors, and leave a hole for the drain.

4.    Attach the membrane to the walls following the steps you used for the floors

5.    Once you have attached the membrane, clear the area of any debris and dust, and then test the shower to see if there is any leakage.

These DIY tips can help you save money. However, for the best shower waterproofing Brisbane provides, consult Shower Repair Center. Visit